| AthletEdge
Product Applications
Restraining
Athletic Surface & Asphalt over Existing Concrete Base
Download
CSI 3-part Specifications and CAD Files
AthletEdge
Restraint Goal
AthletEdge is designed to allow for full and consistent material
thickness to the edge of the pavement.
AthletEdge
helps prevent broken edges typical with unrestrained athletic installations
and provides an affordable maintainable, finished edge.
*Application
Overview
-
Place the sidewall of the AthletEdge 1/2” in from the edge
of concrete base.
- Anchor
into the outer 1” of the AthletEdge base or a minimum of
2” from the edge of the concrete using a Hilti or Ramset
fastening system (see anchoring below).
- Asphalt
base (binder) course is laid on concrete base following AthletEdge
installation instructions.
-
Athletic Surface is laid on base (binder) course following AthletEdge
installation instructions.
-
Weep holes in the sidewall of AthletEdge are located 1/2”
from the top of the restraint allowing drainage from the athletic
surface.
-
Semi-compact backfill material adjacent to the completed installation
providing additional support.
*Intended
as an overview only, please refer to specifier/ manufacturer technical
specifications.
Anchoring
- Anchor
at ends of each section in addition to guidelines indicated below.
-
Anchor into the outer 1” of the AthletEdge base or a minimum
of 2” from the edge of the concrete.
- A
Hilti DX A41 Powder Actuated Fastening System is desirable where
sufficient hold can be obtained. 3/4” to 1” nail (12”on
center) with appropriate charge is recommended. Contact Hilti
customer service at 800.879.8000 for details.
AthletEdge Product:
AthletEdge product (height) is determined by the combined depth
of the asphalt and athletic surface.
Example: Combined depth of surfaces is 2-1/2” = 2-1/2”
AT.
Weep holes are located _” from the top of the restraint, facilitating
drainage from the athletic surface. |
