| AsphaltEdge
Product Applications
Restraining
Double Course of Asphalt over Concrete Base
Download
CSI 3-part Specifications and CAD Files
AsphaltEdge
Restraint Goal
-
AsphaltEdge is designed to allow for full and consistent material
thickness to the edge of the pavement.
- AsphaltEdge
helps prevent broken edges typical to traditional asphalt and
provides a maintainable, finished edge to your asphalt installation.
*Application
Overview
-
Place the sidewall of the AsphaltEdge _” in from the edge
of concrete base.
- Anchor
into the outer 1” of the AsphaltEdge base or a minimum of
2” from the edge of the concrete using a Hilti or Ramset
fastening system (see anchoring below).
- Base
(binder) course of asphalt is laid on concrete base following
AsphaltEdge installation instructions.
- Finish
course of Asphalt is laid on base (binder) course following AsphaltEdge
installation instructions.
-
Semi-compact backfill material adjacent to the completed asphalt
installation providing additional support.
- *Intended
as an overview only, please refer to specifier/ manufacturer technical
specifications.
Anchoring
- Place
the sidewall of the AsphaltEdge _” in from the edge of concrete
base.
- Anchor
into the outer 1” of the AsphaltEdge base or a minimum of
2” from the edge of the concrete.
- Anchor
at ends of each section in addition to guidelines indicated below.
-
A Hilti DX A41 Powder Actuated Fastening System is desirable where
sufficient hold can be obtained. 3/4” to 1” nail (12”on
center) with applicable charge recommended. Contact Hilti customer
service at 800.879.8000 for details.
AsphaltEdge Product:
AsphaltEdge product (height) is determined by the depth of the asphalt.
Example; 2-1/2” of asphalt = 2-1/2” AE. |
